Category: DeHulling

Soybean Dehulling Equip – Kice

This System removes efficiently hulls from previously cracked oilseeds in order to process only “meats” and improving oil yield as well as the life of the internal parts installed on presses and expanders such as main worms shafts, drainage bars, etc. Dehulling is achieved by using Multi-Aspirators® which uses air to classify materials by size and density and are connected with high efficiency centrifugal fans, cyclone collectors and rotary airlocks. There are simple designs having primary aspiration only or complex systems including Rotex screener and secondary aspiration when dehulling exigencies are high.

Add items to cart to receive a free quote by email.

Quote soybeanDehullingKice
Equipment Condition
0
↑ Back to Top

Peanut Shelling Equip – LMC Mfg

A peanut shelling system consists of much more than just a peanut sheller, although that is an important component. The peanut shelling cylinder is one of those components. LMC Peanut Sheller Cylinder is designed with high efficiency, high capacity and minimum split creation.

Add items to cart to receive a free quote by email.

Quote Peanut Shelling Equip - LMC Mfg
Equipment Condition
0
↑ Back to Top

Sunflower Seed Dehulling Equip – Impco

The Impco Decorticator was the first to envision and implement the modern twin-roll hulling design since 1962. First to incorporate a decorticator with a basket beater and high speed separation. First to successfully process undelinted cottonseed with lowest kernel with hull. Highest Capacity per meter width of twin roll drum. Replaceable cutting surface on decorticator roll will process the highest tonnage at the lowest cost. Two removable Basket Beater Trays provided for ease of processing multiple oil seeds such as cottonseed delinted / undelinted, sunflower, soybean and groundnut etc. Three hull aspiration ducts allows for maximized hull removal and meat purification to obtain desired protein.

Add items to cart to receive a free quote by email.

Quote Sunflower Seed Dehulling Equip - Impco
Equipment Condition
0
↑ Back to Top

Sunflower Seed Dehulling Equip- Cantrell

The most efficient primary removal of hulls from oil bearing seeds on the market today. The Beater Separator combines mechanical and pneumatic forces to effectively remove hulls from decorticated oil bearing seeds, including cottonseed, sunflower, soybeans, peanuts, etc. Solidly designed and built for most generic hullers to be mounted over the frame.

Add items to cart to receive a free quote by email.

Quote Sunflower Seed Dehulling Equip- Cantrell
Equipment Condition
0
↑ Back to Top

Cotton Seed Dehulling – Carver

With almost 50% more hulling and separating area than any other machine available, the Gemini™ system provides efficient hulling and maximum recovery of meats from hulls. Special design features enable the Gemini™ to process a variety of seeds, including sunflower, delinted or un-delinted cottonseed, peanuts, cocoa beans and neem. The Gemini’s hulling surfaces are easy to re-sharpen and replace.

Add items to cart to receive a free quote by email.

Quote Cotton Seed Dehulling - Carver
Equipment Condition
0
↑ Back to Top

Jatropha Dehulling Equip – Kice Rotex

This System removes efficiently hulls from previously cracked oilseeds in order to process only “meats” and improving oil yield as well as the life of the internal parts installed on presses and expanders such as main worms shafts, drainage bars, etc. Dehulling is achieved by using Multi-Aspirators® which uses air to classify materials by size and density and are connected with high efficiency centrifugal fans, cyclone collectors and rotary airlocks. There are simple designs having primary aspiration only or complex systems including Rotex screener and secondary aspiration when dehulling exigencies are high.

Add items to cart to receive a free quote by email.

Quote Jatropha Dehulling Equip - Kice Rotex
Equipment Condition
0
↑ Back to Top

Soybean Dehulling – Crown

After cleaning, the beans enter the Crown Whole Bean Aspirator to remove loose hulls and field dust. The beans then enter the Crown Vertical Seed Conditioner ‘VSC’ to condition the beans by a slow heating process raising the temperature of the bean. As the bean temperature rises, the moisture of the bean migrates to the surface allowing the patented Crown Aspiration System to remove the moisture, drying the beans and softening the hulls. After the beans are properly conditioned in the VSC they enter the patented Crown Jet Dryer which uses re-circulated and injected hot air to shrink the hull, releasing the hull/meat bond. After the Jet Dryer the beans enter the Crown Hulloosenator® which uses a steel corrugated roll to split the beans in half and a rubber coated roll to “scuff” the bean, separating the hulls from the meats along with minimizing the amount of fines. The half beans and loose hulls then enter the Crown Cascade Dryer ‘CCD’. In the CCD, the half beans and hulls cascade downward releasing even more hulls. Re-circulated countercurrent heated air will lift the hulls separating the two products.

Add items to cart to receive a free quote by email.

Quote Soybean Dehulling - Crown
Equipment Condition
0
↑ Back to Top