Category: Current Inventory

NEW IHI model M25 High Pressure Mechanical Press

NEW Industrial Hardfacing Inc. model M25 High Pressure Mechanical Press for 4000-6000 pounds per hour – Built in 2015 with 8” Bore barrel, convertible to 9″ bore – Rated for 3,500 Lbs. of PRESSED CAKE. Heavy Duty, SEW Gearbox Rated for 100 HP Continuous Duty / 2.2 Service factor, 100 HP ,3/6-/230/460v TEFC Motor, V-Belt drive, V-Drive and Coupling Guards fabricated in accordance with OSHA Standards, Press Main Frame constructed of Heavy Duty structural steel (Pinned & Welded) Strain Bars, High Output Hardfaced (SC) Main Worm Shaft Arrangement ,Super Duty Choke Assembly , Heavy Duty Construction with Adjustable Jib Crane for press disassembly (less hoist). Available for immediate Inspection and delivery.

Add items to cart to receive a free quote by email.

Quote NEW IHI model M25 High Pressure Mechanical Press 0
↑ Back to Top

Insta Pro Press Model 5005, Used

Insta Pro Press Model 5005, Used in excellent condition, the 5005 press is the highest Insta Pro capacity press, the low profile design allows for ease of operation and maintenance with stainless steel doors & shields, two oil discharge ports, Gear drive with external thrusting housing, Oil transfer pump and krammer unit. Estimated capacity: 3,800 – 4,200 lbs./hr. (1,727-1,909 kg./hr.) Two (2) units available for immediate inspection and delivery.

Add items to cart to receive a free quote by email.

Quote Insta Pro Press Model 5005, Used 0
↑ Back to Top

Krupp Model EP-07 Screw Press, Used

Krupp Model EP-07 screw press, used in excellent condition, has been power cleaned, sandblasted, primed and painted. It comes with a chopper, screw feeder, main worm shaft, 150 HP, 3/60/230/460v Motor. Presently set up for full pressing extruded soybeans. Estimated capacity on extruded soybeans is 70-75 TPD. Available for immediate inspection and delivery.

Add items to cart to receive a free quote by email.

Quote Used Krupp Model EP-07 Screw Press 0
↑ Back to Top

Insta Pro Extruder Series 2000, Used

Used, In Very Good Condition, Insta Pro Series 2000 Extruder, Complete with wall mount control panel or microprocessor control system with Optional side-mount volumetric feeder with agitator. CAPACITY: 1,300 – 3,840 lbs./hr. (588 – 1,745 kg./hr.) *Actual capacities will vary based on raw materials and processing parameters. Four (4) units available for immediate inspection and delivery.

Add items to cart to receive a free quote by email.

Quote Insta Pro Extruder Series 2000 Used 0
↑ Back to Top

Roskamp Flaker Series SP2800-62

Used, Very Good Condition, Roskamp Flaking Mill Series SP2800-62 Complete. Mill Frame Constructed of Ship Channel of High-Strength, Heavy Duty Power Grip Drive, Accumulator Roll Protection, Hydraulic Roll Tension with Positive Stops, One Hydraulic Pump with Control, Corrugated Roll Feeder and 150HP Motor. Also available a roll rectifier for these roll size. Two units available for immediate Inspection and delivery.

↑ Back to Top

Rebuilt Industrial Filter Type 122.902, Model “D”, 412Sq.Ft., Size 60-4-16

This filter is a 412 sq. ft. of filtration area, 60” Diameter carbon steel horizontal Tank with 16 Used in great condition Vertical stainless steel filter leaves with 4” spacing, complete with vibrator, hydraulic pump and hydraulic door mechanism. Pressure 70 PSI. . Available for a quick delivery.

↑ Back to Top

Rebuilt Industrial Filter Type 122.902, Model “D”, 303Sq.Ft., Size 48-3-22

This filter is a 303 sq. ft. of filtration area, 48” Diameter carbon steel horizontal Tank with 22 New Vertical stainless steel Never Leak filter leaves with 3” spacing, complete with vibrator, hydraulic pump and hydraulic door mechanism. Pressure 70 PSI. . Available for immediate delivery.

↑ Back to Top

French Model 24×52 Flaking Mill (Flaker), Used

Used, As Is, Very Good Condition, French Flaking Mill Model 24″x52″ Complete with roll feeder, hydraulic power pack and conventional drive with 125 HP Motor. Only Two (2) units left available for immediate delivery.

French Flaker.image248 20160427_144811_resized French Flaker

Add items to cart to receive a free quote by email.

Quote Used French 24x52 Flaker 0
↑ Back to Top

New Anderson 6″ EEC (Expander-Extruder-Cooker)

Complete with screw feeder, Dog-Leg chute assembly with stainless steel permanent plate magnets, three section barrel design with 2 rows of breaker screws and support legs, reinforced thrust spindle rated for 75HP motor, segmented alloy steel main worn shaft assembly, new design stainless steel cutter guard, die plate and cutter head assembly, 75HP main motor, V-belt drive assembly with safety guard and steam/water injection system with metering valves. Available for immediate delivery.

Add items to cart to receive a free quote by email.

Quote New Anderson 6" EEC (Expander-Extruder-Cooker) 0
↑ Back to Top

Rebuilt, Donlee/York 300 HP Steam Boiler

Donlee York 300HP Firetube Boiler. Built in 2000. Model SPHV-300-N-200132. This boiler produces steam at 150psi and runs on natural gas. Boiler has been reconditioned. Available for immediate inspection and delivery.

Add items to cart to receive a free quote by email.

Quote Rebuilt Donlee/York 300HP 0
↑ Back to Top

Used, European Design Deodorizing System for 25-50 MTPD

Complete System for Bleaching, Neutralizing and Deodorizing available for immediate inspection/delivery, consisting of:

- Steam Generator: 300BHP Graioni Firetube Boiler @ 200 PSIG, Type NG 5000, with burner for diesel #2 @ 5000 kg/hr of steam. Also includes a deaerator tank and vertical grundfos pumps.
- Batch Bleacher / Neutralizer: with caustic soda addition system, agitator shaft with paddles, steam coils, vacuum ejector and LFC Lochem BV Vertical Pressure Leaf Filter Type MVDCD 1225/1250/30/15.
- Deodorizing Unit: Seghers, Volume 20950 liters, Equirepsa Technologia De Vacio, build in Spain, Model EJ.Z-28, free fatty acid recovery and vacuum ejector with condenser.
- Also Includes: Crude Oil Heel Tank, Bleaching Earth Hopper, Vacuum Tank De Smet 841-A, Soap stock storage tank, Lot of structures, platforms and supports.

Deodorizer.1

Deodorizer.3

Deodorizer.2

Deodorizer.5

Add items to cart to receive a free quote by email.

Quote Used, European Design Deodorizing System for 25-50 MTPD 0

Rebuilt Anderson Model 33” Duo Expeller Press

Complete 9” x 5’ variable speed feeder, vertical gearhead and 15HP motor, roller chain drive, vertical discharge with breaker screws and segmented worm shaft, with a 33” long horizontal drainage cage with integral main worm shaft, horizontal transmission with herringbone and helical gears, 50HP main motor, T-53 thrust unit, oil conveyor with 3/4HP motor and guards. Available for immediate delivery.

Add items to cart to receive a free quote by email.

Quote Rebuilt Anderson Model 33” Duo Expeller Press 0
↑ Back to Top

Used As Is Andritz-Sprout Model 4½x8, Auto-tensioning Screener

Triple deck design, removable aluminum cover with inspection ports, 60×100 screens size, 3HP motor with gearbox and v-belts.

Add items to cart to receive a free quote by email.

Quote Used As Is Andritz Sprout model 4½x8 Screener 0
↑ Back to Top

Rebuilt Bauer Model 199 Seed Cleaner

Mechanic & Pneumatic 2-tray design seed cleaner with feeder,
2 screens and aspiration chamber with 10HP motor.

Add items to cart to receive a free quote by email.

Quote Rebuilt Bauer Model 199 Seed Cleaner RDISC-102 0
↑ Back to Top